A weekend away with the caravan, a box trailer full of gear, or a bike rack for the family should not become a range gamble. The future of electric vehicle towing is promising, but it asks drivers to think more carefully about weights, charging stops and the electrical equipment fitted to the vehicle.
Electric vehicles already offer useful towing ability. Their instant torque makes pulling away with a loaded trailer feel controlled, and the low-mounted battery can help with vehicle stability. But towing is demanding work. It changes how an EV uses energy, how far it can travel between charges, and what accessories need to be installed properly before you head out of Canberra.
Why electric vehicle towing is changing
For years, towing discussions focused on engine size, transmission temperature and fuel consumption. With an EV, the conversation starts with battery capacity, charge speed, towing range and access to trailer-friendly charging.
That does not mean electric towing is only for early adopters or short local trips. Many current EVs are rated to tow braked trailers, with capacities ranging from lighter loads through to substantial caravans and work trailers. The right vehicle depends on the job. A cyclist carrying two e-bikes has very different needs from a tradie towing tools, or a family pulling a full-sized caravan towards the coast.
The key is to work from the manufacturer’s figures, not assumptions. Check the vehicle’s braked towing capacity, towball download limit, gross combination mass and any conditions that apply when towing. These limits are connected. A towbar may be built for a certain rating, but the vehicle’s lowest applicable limit always governs what can legally and safely be towed.
Torque helps, but it is not the whole story
EVs produce strong torque from a standstill, which is useful when moving a trailer from a steep driveway, merging into traffic or climbing Canberra’s surrounding hills. Regenerative braking can also make downhill towing feel more composed, provided the trailer is loaded correctly and its brakes are working as they should.
Range is the trade-off. Aerodynamic drag rises quickly at highway speeds, and a caravan or tall enclosed trailer creates plenty of it. Add a heavy load, headwind, cold weather or a hilly route and an EV can use considerably more energy than it does unladen. Drivers should expect their towing range to reduce, sometimes significantly, rather than relying on the distance shown for normal driving.
The future of electric vehicle towing is practical planning
The most successful EV towing trips will be planned, not improvised. Before leaving, calculate the route around charging locations that have room to enter, turn and exit with a trailer attached. Some charging bays are easy to access in a car but awkward with a caravan, boat trailer or work trailer behind you.
It is also wise to allow a buffer rather than arriving at a charger with a near-empty battery. A detour, a queue or a charger out of service is inconvenient in any vehicle. With a trailer in tow, it can become a much bigger job. On longer trips, charging more often for shorter periods may be easier than trying to stretch every kilometre from the battery.
Payload matters as much as trailer weight. Passengers, recovery gear, luggage, a fridge, tools and accessories all count towards the vehicle’s limits. It is common for towing setups to become overloaded not because the trailer is too heavy, but because the vehicle is carrying more than the owner realises.
Get the towbar rating and fitment right
An EV towbar is not a generic bolt-on accessory. Modern vehicles have sensors, high-voltage battery structures, underbody shielding and model-specific mounting points that need to be respected. The towbar must suit the exact vehicle variant and intended towing load, and it must be installed according to the approved fitting method.
For some owners, a removable towbar makes sense when the vehicle is mainly used around town. It keeps the rear of the car tidy and avoids an exposed hitch when it is not needed. For regular towing, a fixed towbar may be the practical option. Heavy-duty requirements, bike racks and specialist applications can call for a different solution again.
A properly fitted towbar should not compromise parking sensors, rear-camera operation or safety systems. Where compatible equipment is available, the vehicle should recognise when a trailer is connected and adjust relevant functions accordingly. This is one area where neat wiring and correct configuration make a real difference to daily use.
Trailer wiring is not an afterthought
A trailer needs reliable lights every time it is connected. That sounds basic, but modern EV electrical systems are sensitive and can require vehicle-specific wiring kits, modules and coding. A poor-quality wiring job may trigger warning lights, interfere with vehicle functions or leave the trailer lights unreliable when you need them most.
Professional installation is particularly valuable where the vehicle uses a CAN bus electrical system. The right module communicates with the vehicle correctly, protects its circuits and provides dependable operation for indicators, brake lights, tail lights and reverse lights. It also makes fault finding far simpler if a problem ever develops.
Electric brake controllers are another important consideration. If the trailer is fitted with electric brakes, the brake controller needs to be compatible with the tow vehicle and calibrated for the trailer. The controller should provide smooth, proportionate braking rather than a harsh response that unsettles the load. This is critical for caravans, horse floats, machinery trailers and loaded work trailers.
For caravans and off-grid setups, an Anderson plug may also be required to charge auxiliary batteries or run approved trailer equipment. The cable size, circuit protection and connection method should be matched to the load. Fitting a plug alone is not enough if the wiring behind it is undersized or poorly protected.
Charging infrastructure will catch up
Australia’s public charging network is expanding, and that will make long-distance EV towing easier over the next few years. The real improvement will come from more pull-through charging bays, larger charging sites and better locations along popular touring routes.
Until then, EV owners towing caravans or trailers need to be selective. A charger at a busy shopping centre may be suitable for a quick top-up in a car, but not for a long rig that cannot safely occupy or manoeuvre through the space. Regional planning still matters, particularly on holiday weekends when chargers and caravan parks are busy.
Home charging remains a major advantage for local trailer users. If you use a box trailer for tip runs, tow bikes to the trails, move equipment between jobs or take a small boat out on weekends, starting each trip with a full battery is convenient. For many Canberra drivers, those regular local towing tasks are already well within the practical range of a suitable EV.
Expect better towing-focused EVs
Vehicle manufacturers are responding to demand with larger battery packs, improved thermal management, faster charging and clearer towing specifications. Some future models will be designed with touring, worksite use and heavier towing more firmly in mind.
Technology will help, but it will not remove the need for sound towing practice. Correct load distribution, appropriate tyre pressures, working trailer brakes, secure safety chains and a properly rated coupling will remain non-negotiable. An electric drivetrain changes the power source, not the fundamentals of safe towing.
Choosing an EV towing setup that suits your work and weekends
Start with what you tow most often, not the biggest load you might pull once every few years. If you mainly carry bikes, a quality bike rack and an approved towbar may be all you need. If you tow a camper trailer a few times a year, range planning and a compliant brake controller become more relevant. If the vehicle is used for trade work every day, durability, wiring protection and easy trailer connection should be high on the list.
It pays to bring the full picture to an installer: the vehicle make, model and year, the trailer type, its loaded weight, whether it has electric brakes, and any accessories such as a bike rack, caravan battery or reversing camera. That allows the right towbar, wiring and electrical components to be specified from the outset rather than patched together later.
Towbar Discounts provides mobile towbar and auto electrical installation across Canberra, so the work can be completed at home or the office without giving up a day at a workshop. For EV owners, that practical service matters just as much as the hardware – the right gear fitted correctly gives you confidence before the trailer is loaded.
The best next step is simple: confirm your vehicle’s towing limits, weigh what you genuinely plan to tow, and have the towbar and wiring matched to that job. Then your EV can be ready for the driveway, the worksite or the next trip away without avoidable surprises.





